1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable from battery and wait for
at least thirty seconds before beginning work.
|
3. |
Place a passenger airbag on the crash pad and tighten the passenger
airbag mounting bolts.
|
4. |
Install the crash pad.
(Refer to Body - "Main crash pad assembly")
|
5. |
Tighten the passenger airbag mounting bolts.
|
6. |
Connect the passenger airbag harness connector to the SRS main
harness connector.
|
7. |
Reinstall the glove box housing.
(Refer to Body - "Glove box housing")
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the passenger airbag (PAB), confirm proper system
operation:
|
Rear Shelf Side Trim Component Location
(5Door)
1. Rear shelf side trim
...
Lubricants
Engine
TM
Joint
Lubricants
Quantity
Nu 1.8 MPI
6 M/T
BJ
RBA
90g
TJ
CW09-VX21
135g
Nu ...
Front Wiper Motor Component Location
1. Cap
2. Nut
3. Wiper arm & blade
4. Retainer
5. Cowl top cover
6. Bolt
7. Wiper motor & linkage assembly
...