Never attempt to measure the circuit resistance of the Emergency
Fastening Device (EFD) even if you are using the specified tester. If
the circuit resistance is measured with a tester, the pretensioner will
be ignited accidentally. This will result in serious personal injury.
|
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the smart junction box.
(Refer to Body Electri ...
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the cluster fascia pan ...
Installation
1.
Install in the reverse order of removal.
2.
Adjust the clutch switch.
(1)
Adjust the gab by rotating t ...