1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the seat belt after pushing the lock pin (A).
|
3. |
Remove the door scuff trim.
(Refer to Body - "Door scuff trim")
|
4. |
Remove the center pillar trim.
(Refer to Body - "Center pillar trim")
|
5. |
Disconnect the emergency fastening device connector (A).
|
6. |
Loosen the emergency fastening device mounting bolt (B) and remove
the emergency fastening device.
|
Front Strut Assembly Disassembly
1.
Using the special tool (09546-26000), compress the coil spring
(A).
Tightening torque:
58.3 ~ 73.5N.m (6.0 ~ 7.5kgf.m, 43.4 ~ 54.2 ...
Rear Seat Belt Buckle Component Location
(4Door)
1. Rear seat belt buckle [LH]
2. Rear seat belt buckle [RH]
(5Door)
1. Rear seat belt buckle [LH]
2. Rear seat belt bu ...
Timing Chain Inspection
Sprockets, Chain Tensioner, Chain Guide, Chain Tensioner Arm
1.
Check the CVVT sprocket and crankshaft sprocket for abnormal wear,
cracks, or damage. Replace if necessa ...