1. |
Remove ignition key from the vehicle.
|
2. |
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
|
3. |
Install the emergency fastening device with a bolt (B).
|
4. |
Connect the emergency fastening device connector (A).
|
5. |
Install the center pillar trim.
(Refer to Body - "Center pillar trim")
|
6. |
Install the door scuff trim.
(Refer to Body - "Door scuff trim")
|
7. |
Insert the seat belt to the emergency fastening device.
|
8. |
Reconnect the battery negative cable.
|
9. |
After installing the emergency fastening device, confirm proper
system operation:
|
Front Washer Motor Removal
-
When servicing the washer pump, be careful not to damage
the washer pump seal.
...
Tightening Torques
Items
N.m
kgf.m
lb-ft
Oil drain plug
58.9 ~ 78.5
6.0 ~ 8.0
43.4 ~ 57.8
Oil filler plug
58.9 ~ 78.5
6.0 ~ 8.0
...
Relay Box (Passenger Compartment) Description
Smart Junction Box(SJB)
1.
General function : Interior Junction Box + some functions of BCM
It controls loads with CAN communication and IPS.
2. ...