1. |
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Remove the battery (A) and ECM (B).
|
3. |
Disconnect the brake fluid level switch connector (A), and remove
the reservoir cap.
|
4. |
Remove the brake fluid from the master cylinder reservoir with
a syringe.
|
5. |
Disconnect the brake tube (A) from the master cylinder by loosening
the tube flare nut.
|
6. |
Remove the clutch hose (B). [MT only]
|
7. |
Remove the master cylinder (B) from the brake booster after loosening
the mounting nuts (A).
|
Description
Burglar Alarm State [B/A State]
B/A State
Description
DISARM
1.
In "DISARM" state, no vehicle start inhibition. So, whe ...
Yaw-rate and Lateral G Sensor
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate electronically by the vibration change of plate
fork inside the yaw rate sensor.
If ya ...
Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is
seen. Make this adjustment before you start driving.
Do not place objects in the rear seat which would interfere with yo ...