(4Door, 5Door, 2Door) |
1. |
Remove the front door module.
(Refer to Front Door - "Front Door Module")
|
2. |
Disconnect the front door outside handle connector (A).
|
3. |
Remove the hole plug (B).
|
4. |
After loosening the mounting bolt, then remove the front door
outside handle cover (A).
|
5. |
Remove the front door outside handle (A) by sliding it rearward.
|
6. |
Install in the reverse order of removal.
|
Multimedia Jack Circuit Diagram
...
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable t ...