Kia Forte: Front Fog Lamps Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Removal
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
|
| 3. |
Remove the front fog lamp connectors (A) from the front bumper.
[LH]
[RH]
|
| 4. |
Remove the front fog bulb (A) turning it in the counterclockwise
direction.
|
| 5. |
Remove the front fog lamp assembly (A) after loosening the screws.
|
Front Fog Lamps Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the lighting switch of the multi-function switch.
(Refer to Multifunction Swit ...
Front Fog Lamps Installation
1.
Install the front fog bulb.
2.
Reconnect the lamp connector.
3.
Install the front bumper cover.
...
See also:
Transaxle Control Module (TCM) Circuit Diagram
...
Accelerator Position Sensor (APS) Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
ECM Terminal And Input/Output signal (M/T)
ECM Terminal Function
Connector [CNG-MA]
Pin No.
Description
Connected to
1
Ignition Coil (Cylinder #1) control output
Ignition Co ...
Copyright © www.kifomanual.com 2014-2024