Kia Forte: Front Hub / Knuckle Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle Installation

1.

Install in the reverse order of removal.

Use a SST (09581-11000) when installing the brake caliper assembly.

(Refer to Brake System - "Front Disc Brake")

2.	Check the front alignment. (Refer to Suspension System - "Front Alignment")

Front Hub / Knuckle Inspection

1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Driveshaft Assembly

...

See also:

Components Operations
ECM (Engine Control Module) 1. The ECM(PCM) (A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transponder ...

Description
• Component location : Clutch switch is connected to top of the clutch pedal assembly. • Function 1. Clutch ...

Power Door Lock Switch Inspection
Driver Door Lock Switch 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. (Refer to Body - "Front ...

Categories

Copyright © www.kifomanual.com 2014-2024