1. |
Check the bushing for wear and deterioration.
|
2. |
Check the front stabilizer bar for deformation.
|
3. |
Check the all bolts and nuts.
|
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...
Component Location
1. Start Stop Button(SSB)
2. FOB key
3. Smart key unit
4. Interior antenna
5. Trunk antenna
6. Door handle & door antenna
7. Bumper antenna
8. Trunk lid open sw ...
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen 2 screws holding the overhead console (A).
3.
...