1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Loosen the bolt & nut and then remove the lower arm (A).
|
4. |
Loosen the bolts and nuts and then remove the front lower arm
(A).
|
5. |
Installation is the reverse of removal.
|
6. |
Check the front alignment.
(Refer to Front Suspension System - "Front Alignment")
|
Components
...
Troubleshooting
Symptom
Possible cause
Remedy
Tachometer does not operate
Cluster fuse (10A) blown
Check for short and replace fuse
CAN line faulty
...
Inspection
1.
Inspect the check valve in the vacuum hose.
Do not remove the check va ...