Kia Forte: Front Pillar Trim Replacement
•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front pillar trim.
(1) |
To remove the front pillar trim, the below tool (A) must
be used.
|
(2) |
Slightly spread open the front pillar trim and then place
the tool (A) on the mounting clip (B) like the picture below.
After placing the tool (A) on the mounting clip (B) push
it to the front.
• |
Once the front pillar trim has been removed,
replace the clips to new ones.
|
|
|
(3) |
Remove the front pillar trim (A).
• |
Remove the mounting clip (A) by turning
it clockwise.
|
|
|
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
(4Door, 5Door)
1. Center pillar lower trim
2. Center pillar upper trim
(2Door)
1. Rear inner outer trim
2. Center pillar upper ...
See also:
Customer Complaint Analysis Check Sheet
There are six areas where a problem can occur: wiring harness, the radio,
the CD player, and speaker. Troubleshooting enables you to confine the problem
to a particular area.
Chart 1 ...
Seat Belt Switch Removal
1.
Remove the front seat.
2.
After loosening the mounting bolt, then remove the front seat
belt buckle (A).
...
Components
Input/Output Specification
IMS input/output pin information
No.
Signal Name
I/O
Contents
Remark
A1
-
-
-
...