|
1. |
Remove the front seat track mounting cover.
|
2. |
After loosening the mounting bolts, remove the front seat assembly
(A).
|
3. |
Disconnect the seat buckle connector (A), seat warmer & power
seat connector (B), SAB connector(C), PODS connector (D).
[Driver's]
[Passenger's]
|
4. |
Install in the reverse order of removal.
|
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
Front Strut Assembly Components
1. Strut assembly
2. Insulator
3. Strut bearing
4. Spring upper pad
5. Coil spring
6. Dust cover
7. Spring lower pad
...
Ambient Temperature Sensor Description
The ambient temperature sensor is located at the front of the condenser
and detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, ...