(4Door, 5Door) |
|
1. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
2. |
After loosening the mounting bolt, then remove the front seat
belt upper anchor (A).
|
3. |
After disconnecting the pretensioner connector lock pin, remove
the front seat belt pretensioner connector (A), loosen the mounting
bolt, then remove the front seat belt pretensioner (B).
|
4. |
Install in the reverse order of removal.
|
Front Door Inside Handle Replacement
(4Door, 5Door, 2Door)
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosenin ...
Circuit Diagram
...
Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive crankcase ventilation valve installation
0.2 ~ 0.3
1.96 ~ 2.94
1.45 ~ 2.17
Canister install ...