Kia Forte: Front Seat Shield Outer Cover Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Loosen the front seat shield outer cover mounting screws.
|
|
2. |
To remove the front seat shield outer cover (A), push the lock
pin (B) in the direction of the arrow.
|
|
3. |
Disconnect the connector (A).
|
|
4. |
Install in the reverse order of removal.
|
• |
Make sure the connector is plugged in properly.
|
|
• |
Replace any damaged clips.
|
|
|
(2Door)
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the height adjust lever cap (A).
|
|
2. |
After loosening the mounting screws, then remove the height adjust
lever (B).
|
|
3. |
To, disengage the lock pin, pull the recliner lever (A) after
pushing lock pin hole (B) with the pointed instrument (C).
|
• |
Be careful not to damage the lock pin.
|
|
|
|
4. |
Loosen the front seat shield outer cover mounting screws.
|
|
5. |
To remove the front seat shield outer cover (A), push the lock
pin (B) in the direction of the arrow.
|
|
6. |
Disconnect the connector (A).
|
|
7. |
Install in the reverse order of removal.
|
• |
Make sure the connector is plugged in properly.
|
|
• |
Replace any damaged clips.
|
|
|
1. Front seat shield outer cover
...
1. Front seat shield inner cover
...
See also:
Components Operations
ECM (Engine Control Module)
1.
The ECM(PCM) (A) carries out a check of the ignition key using
a special encryption algorithm, which is programmed into the transponder
...
Engine Oil Oil And Filter Replacement
•
Prolonged and repeated contact with mineral oil will result
in the removal of natural ...
Front Hub / Knuckle Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
C ...
Front Seat Shield Outer Cover Component Location
Front Seat Shield Inner Cover Component Location