1. |
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
|
2. |
Remove the front wheel and tire (A) from front hub.
|
3. |
Remove the stabilizer link (A) loosening the nut (B) and (C).
|
4. |
Installation is the reverse of removal.
|
5. |
Check the front alignment.
(Refer to Front Suspension System - "Front Alignment")
|
Seat Belt Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat belt/door,
the ISG function reacts as follo ...
Output Speed Sensor Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the Transaxle Control Module(TCM ...
Purge Control Solenoid Valve (PCSV) Circuit Diagram
(M/T)
(A/T)
...