1. |
Loosen the windshield wiper arm nut (B) after removing a wiper
cap (A).
|
2. |
Remove the windshield wiper arm and blade.
|
3. |
If necessary, release the wiper blade fixing clip by pulling up
and remove the wiper blade from the inside radius of wiper arm.
|
4. |
Disconnect the washer hose (A) connected to cowl top cover.
|
5. |
Remove the weather strip and the cowl top cover (A) after removing
4 retainers.
|
6. |
Disconnect the wiper motor connector from the wiper motor & linkage
assembly.
|
7. |
Remove the windshield wiper motor and linkage assembly (A) after
removing 2 bolts.
|
8. |
Disconnect the connector (A) from the wiper motor.
|
9. |
Hold the wiper motor crank arm and remove the upper linkage (A)
from the wiper motor crank arm.
|
10. |
Remove the lower linkage (A) from the wiper motor crank arm.
|
11. |
Remove the crank arm (A) after loosening the mounting nut.
|
12. |
Remove the wiper motor (A) with 3 bolts.
|
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening ...
Windshield washers (front)
In the OFF position, pull the lever gently toward you to spray washer fluid on
the windshield and to run the wipers 1-3 cycles.
Use this function when the windshield is dirty.
The spray and wip ...
Parking Assist System Switch Installation
1.
Install the switchs and connect the switch connectors.
2.
Insatll the floor console assembly.
3.
Connect the ...