Kia Forte: Fuel Filter Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Filter Removal
| 1. |
Remove the fuel pump (Refer to “Fuel Pump” in this group).
|
| 2. |
Disconnect the electric pump wiring connector (A) and the fuel
sender connector (B).
|
| 3. |
Remove the head assembly (A) after releasing the cushion fixing
clip (B).
|
| 4. |
Disconnect the fuel tube quick-connectors (C).
|
| 5. |
Remove the fuel sender (A) in the direction of an arrow.
|
| 6. |
Disconnect the fuel tube connector (A).
|
| 7. |
Remove the cut valve (A) after releasing hooks (B).
|
| 8. |
Remove the reservior-cup (B) after releasing the fixing hooks
(A).
|
| 9. |
Release the fixing hooks, and then remove the pre-filter (A) and
the fuel pressure regulator (B).
1. Head Assembly
2. Electric Pump Motor
3. Fuel Filter
4. Fuel Sender
5. Fuel Pressure Regulator
6. Pre-filter
7. Reservoir cup
|
Fuel Pump Installation
1.
Install in the reverse order of removal.
Be careful of fuel pump direc ...
Fuel Filter Installation
1.
Install in the reverse order of removal.
...
See also:
Specifications
Items
Specifications
Clutch operation method
Hydraulic type
Clutch cover
Type
Diaphragm spring strap
Clutch disc
...
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at hig ...
Transaxle Control Module (TCM) Replacement
1.
Turn ignition switch OFF.
2.
Disconnect the negative (-) battery cable.
3.
Disconnect the TCM connector (A ...
Copyright © www.kifomanual.com 2014-2024