Kia Forte: Fuel Line Removal
| 1. |
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release
Residual Pressure in Fuel Line".)
|
| 2. |
Turn the ignition switch OFF, and then remove battery (-) cable.
|
| 3. |
Remove the installation nut (B), and then disconnect the fuel
feed tude (A).
|
| 4. |
Disconnect the vapor hose (A) which is connected from the PCSV.
|
| 5. |
Lift the vehicle.
|
| 6. |
Remove the fuel tank.
(Refter to Fuel Delivery System - "Fuel Tank")
|
| 7. |
Remove the vapor tube and low fuel line fixing clip (A) by using
a common driver.
|
| 8. |
Remove the installation nuts, and then push the heat protector
in the direction of an arrow.
|
| 9. |
Remove the installation bolts (A), and then remove the fuel line
fixing clip (B).
|
| 10. |
Release the fuel & brake line protector (A) by disconnecting the
fixing clip.
|
| 11. |
Remove the fuel line.
|
Fuel Pressure Regulator Installation
1.
Install in the reverse order of removal.
...
Fuel Line Installation
•
Install the component with the specified torques.
•
...
See also:
Tail Gate Trim Replacement
(5Door)
[Tail gate upper trim]
•
When prying with a flat-tip screwdri ...
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the seat belt after pushin ...
Luggage Side Trim Replacement
(5Door)
•
Put on gloves to protect your hands.
...
Copyright © www.kifomanual.com 2014-2024