1. |
Remove the fuel pump (Refer to “Fuel Pump” in this group).
|
2. |
Disconnect the electric pump wiring connector (A) and the fuel
sender connector (B).
|
3. |
Remove the head assembly (A) after releasing the cushion fixing
clip (B).
|
4. |
Disconnect the fuel tube quick-connectors (C).
|
5. |
Remove the fuel sender (A) in the direction of an arrow.
|
6. |
Disconnect the fuel tube connector (A).
|
7. |
Remove the cut valve (A) after releasing hooks (B).
|
8. |
Remove the reservior-cup (B) after releasing the fixing hooks
(A).
|
9. |
Release the fixing hooks, and then remove the pre-filter (A) and
the fuel pressure regulator (B).
1. Head Assembly
2. Electric Pump Motor
3. Fuel Filter
4. Fuel Sender
5. Fuel Pressure Regulator
6. Pre-filter
7. Reservoir cup
|
Components
Components (1)
(Rear Seat 5:5 Type)
[Rear Seat Back]
1. Rear seat headrest
2. Rear seat back webbing guide
3. Rear seat headrest guide
4. Rear seat back ...
Power Door Lock Switch Inspection
Driver Door Lock Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front ...
Components
Components (1)
(4Door)
1. Front bumper cover
2. Front bumper upper weatherstrip
3. Front bumper side bracket [LH]
4. Front bumper side bracket [RH]
Co ...