1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Lift the vehicle.
|
3. |
Disconnect the canister close valve connector (A).
|
4. |
Disconnect the ventilation hose (B).
|
5. |
Remove the fuel tank air filter after removing the mounting bolts
(C).
|
6. |
Release the lever (A), and then separate the canister close valve
(B) from the fuel tank air filter after rotating it in the direction
of the arrow in the figure.
|
Outside Rear View Mirror Replacement
(4Door, 5Door)
•
Put on gloves to protect your hands.
...
Variable Charge Motion Actuator (VCMA) Specification
Motor
Item
Specification
Coil Resistance (Ω)
3.4 ~ 4.4 [20°C(68°F)]
Position sensor
Item
Specification
Coil Resis ...
Brake Booster Vacuum Pressure Sensor Installation
Brake Booster Vacuum Pressure Sensor can not be replaced separately
due to vacuum leak.
Therefore, the sensor mu ...