1. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
2. |
Remove the rear seat cushion (Refer to “Seat” in BD group).
|
3. |
Remove the fuel pump service cover (A).
|
4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure
sensor connector (B).
|
5. |
Disconnect the fuel feed tube quick connector (C).
|
6. |
Remove the rear - LH wheel & tire.
|
7. |
Lift the vehicle and support the fuel tank with a jack.
|
8. |
Disconnect the fuel filler hose (A).
|
9. |
Disconnect the vapor tube quick-connector (A).
|
10. |
Remove the under cover (A) after loosening the mounting nuts.
|
11. |
Remove the fuel tank from the vehicle after removing the fuel
tank band.
|
12. |
Remove the fuel tank from the vehicle after removing the fuel
tank band (A).
|
Removal
Handle the sensor with care.
1.
Remove the tire.
(Refer to Tire/Wheels - "Tire& ...
Tail Gate Lift Replacement
(5Door)
•
Take care to not let the tailgate fall on you as the lifts
are re ...
AGM Battery Cleaning
1.
Make sure the ignition switch and all accessories are in the OFF
position.
2.
Disconnect the battery cables (negative first).
...