Kia Forte: G-Sensor Calibration
| 1. |
Ignition "OFF", connect GDS.
|
| 2. |
Ignition "ON" & Engine "OFF" select vehicle name and ESC system.
|
| 3. |
Perform G-sensor calibration using GDS.
|
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Pull the passenger seat towards the front till the end.
...
ESC OFF Switch Description
1.
The ESC OFF switch is for the user to turn off the ESC system.
2.
The ESC OFF lamp is on when ESC OFF switch is engaged.
...
See also:
Cylinder Head Components
1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Cam carrier
8. Cyli ...
ETC (Electronic Throttle Control) System Fail-Safe Mode
Item
Fail-Safe
ETC Motor
Throttle valve stuck at 7°
TPS
TPS 1 fault
Replace it with TPS 2
TPS 2 fault
Replace it with T ...
IMS Power Seat Control Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure
that continuity ex ...
Copyright © www.kifomanual.com 2014-2024