|
|
1. |
Disconnect the stopper (B) from the glove box (A).
|
2. |
Disconnect the air damper (A) from the glove box (B).
|
3. |
Disconnect the pins (A) and then remove the glove box (B).
|
4. |
Using a screwdriver or remover, remove the crash pad side cover
[RH] (A).
|
5. |
Remove the glove box hose cover (A).
|
6. |
Remove the glove box hose (B) by sliding it upward.
|
7. |
After loosening the mounting screws, then remove the glove box
housing (A).
|
8. |
Disconnect the glove box lamp connector (A).
|
9. |
Installation is the reverse of removal.
|
Rear Door Side Weatherstrip Replacement
(4Door, 5Door)
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m,12.3 ~ ...
CVVT Oil Control Valve (OCV) Circuit Diagram
(M/T)
(A/T)
...
Components
...