Kia Forte: Heated Oxygen Sensor (HO2S) Description

Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Catalytic Converter. It varies in accordance with the air/fuel ratio.

The sensor must be hot in order to operate normally. To keep it hot, the sensor has a heater which is controlled by the ECM via a duty cycle signal. When the exhaust gas temperature is lower than the specified value, the heater warms the sensor tip.

Knock Sensor (KS) Installation

   • Install the component with the specified torques. • ...

Heated Oxygen Sensor (HO2S) Specification

HO2S [Bank 1/Sensor 1] (Linear type) Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] (Binary type) ...

See also:

Drive plate Components
1. Adapter plate 2. Drive plate ...

Console Armrest Replacement
   • Put on gloves to protect your hands. &n ...

Operation
Evaporative System Monitoring Evaporative And ORVR Emission Control System This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way val ...