Kia Forte: Heater Unit Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Heater / Heater Unit Components
| 1. Heater Case (Left) 2. Heater Case (Right) 3. Console Separator 4. Defog Door 5. Vent Door 6. Floor Door 7. Mix Door (Manual) 8. Mix Door (DATC-Left) 9. Mix Door (DATC-Right) 10. Seal 11. Vent Arm 12. Floor Arm |
13. Mode Cam 14. Mode Actuator 15. Temperature Door Arm 16. Temperature Door Lever 17. Temperatuer Control Actuator (DATC) 18. PTC Heater (GSL) 19. Anti Noise Pad (B) 20. Heater Core 21. Heater Pipe Cover 22. Separator 23. Defog Actuator 24. Intake Hose |
25. Cooling Hose 26. Temperature Control Actuator 27. Door Arm 28. Temperature Door Lever 29. Evaporator Temperature Sensor 30. Console Cover 31. Evaporator Pipe Grommet 32. Evaporator Pipe 33. Evaporator Core 34. Heater & Evaporator Lower Case 35. Drain Hose |
Heater Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/ recycling/ charging station.
...
See also:
Manifold Absolute Pressure Sensor (MAPS) Installation
•
Install the component with the specified torques.
•
...
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, this number will enable an authorized Kia dealer to duplicate
the keys easily. Remove the k ...
Description
The ECM (Electro Chromatic inside rear view Mirror) is for dimming the
reflecting light from a vehicle behind at night, Preventing glare from the light.
The forward facing sensor detects brig ...
Copyright © www.kifomanual.com 2014-2024