Kia Forte: Hood Assembly Replacement
| •
|
Be careful not to damage the hood and body.
|
|
| •
|
When removing and installing the hood, an assistant is
necessary.
|
| •
|
When removing the clips, use a clip remover.
|
|
|
1. |
After loosening the hood hinge (B) mounting bolts, remove the
hood assembly (A).
Tightening torque :
21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)
|
|
|
2. |
Install in the reverse order of removal.
|
• |
Make sure the hood locks/unlocks and opens/closes
properly.
|
|
• |
Adjust the hood alignment.
|
|
|
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
...
See also:
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...
Vehicle break-in process
No special break-in period is needed. By following a few simple precautions for
the first 600 miles (1,000 km) you may add to the performance, economy and life
of your vehicle.
Do not race the e ...
Replacement
•
Be careful not to damage the fender and body.
...
Hood Assembly Component Location
Hood Insulator Pad Replacement