Kia Forte: Hood switch Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Hood switch Inspection
| 1. |
Disconnect the hood switch connector (A).
|
| 2. |
Check for continuity between terminals
|
Hood switch Description
The hood switch is included as the influencing factors in the calculation
of the ISG function. If the hood is open, the engine must not be started or
stopped by the ISG function for safety re ...
See also:
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...
Outside Rear View Mirror Component Location
(4Door, 5Door)
1. Outside rear view mirror
(2Door)
1. Outside rear view mirror
...
Relay Box (Passenger Compartment) Removal
Passenger Compartment Junction Box (SJB)
1.
Disconnect the negative(-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer ...
Copyright © www.kifomanual.com 2014-2024