Kia Forte: In-car Sensor (DATC only) Description
An in-car air temperature sensor is located in the crash pad lower panel.
The sensor contains a thermistor which measures the temperature of the
inside. The signal decided by the resistance value which changes in accordance
with perceived inside temperature, is delivered to the heater control unit and
according to this signal the control unit regulates the in-car temperature to
the intended value.
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the evaporator temperature sensor connector (A).
3.
...
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...
See also:
Master Cylinder
Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder
...
Garment Hook Components
(2Door)
1. Garment hook
...
TJ Joint Components
[LH]
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Shaft
6. TJ boot band
7. TJ boot
8. Spider assembly
9. Snap ring
10. TJ c ...