Kia Forte: Injector Description
Based on information from various sensors, the ECM can calculate the fuel
amount to be injected. The fuel injector is a solenoid-operated valve and the
fuel injection amount is controlled by length of injection time. The ECM controls
each injector by grounding the control circuit. When the ECM energizes the injector
by grounding the control circuit, the circuit voltage should be low (theoretically
0V) and the fuel is injected. When the ECM de-energizes the injector by opening
control circuit, the fuel injector is closed and circuit voltage should momentarily
peak.
•
Install the component with the specified torques.
•
...
Item
Specification
Coil Resistance (Ω)
13.8 ~ 15.2 [20°C(68°F)]
...
See also:
Basic Service Symbols
There are five primary symbols used to complement illustrations. These symbols
indicate the part to apply such materials during service.
Symbol
Meaning
...
IMS Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Sunroof Glass Component Location
1. Sunroof glass
...