1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
3. |
Disconnect the injector connector (A).
|
4. |
Disconnect the fuel feed tube quick-connector (B).
|
5. |
Remove the installation bolt (C), and then remove the delivery
pipe & injector assembly from the engine.
|
6. |
Remove the fixing clip (A), and then separate the injector from
the delivery pipe.
|
Dynamic Damper Components
1. BJ assembly
2. Circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
1 ...
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
Main Crash Pad Assembly Replacement
•
Put on gloves to protect your hands.
&n ...