1. |
Disconnect the ignition switch connector (B) and key warning switch
connector (A) from the steering column.
|
2. |
Check for continuity between the terminals.
|
3. |
If continuity is not specified, replace the switch.
|
Installation
1.
Install the key lock cylinder.
2.
Install the key warning switch and key Illumination.
3.
Install the key wa ...
Drive plate Removal and Installation
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate (A ...
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...