1. |
Inspect diaphragm spring wear which is in contact with a clutch
release bearing.
|
2. |
Check the clutch cover and disc surface for wear or cracks.
|
3. |
Check the clutch disc facing for slipping or oil marks.
|
4. |
Measure the depth from a clutch facing surface to a rivet. If
the measured value is less than the specification below, replace it.
|
Crankshaft Position Sensor (CKPS) Specification
Item
Specification
Coil Resistance(Ω)
774 ~ 946 [20°C (68°F)]
...
Component Location
1. Fuel filler door
...
Steering Gear box Components
1. Steering Gear box
...