1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
|
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
|
3. |
Disconnect the back up lamp switch connector (A).
|
4. |
Check the continuity between no. 1 and 2 terminals of backup lamp
switch. When the shift lever is in reverse, there should be continuity.
|
Auto Light Sensor Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the auto light sensor (A) from crash pad upper side by
using screw (-) driver.
...
Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive crankcase ventilation valve installation
0.2 ~ 0.3
1.96 ~ 2.94
1.45 ~ 2.17
Canister install ...
Voice recognition
Using Voice Recognition
Starting Voice Recognition
Shortly press the
key on the steering wheel. Say a command
If prompt feedback is in [ON], then the system will say “Please say a command
a ...