Kia Forte: Inspection
If any of the following conditions occur, WCS reset and accuracy check
should be performed.
| • |
The WCS ECU or any of the sensors is replaced.
|
| • |
The vehicle is brought to the repair shop due to an accident or
a crash even though the severity seems to be minor.
|
| • |
The telltale lamp is not illuminated when thepassenger seat is
not occupied.
|
| • |
The telltale lamp is delayed more than 10 seconds to be turned
off when an adult passenger seats in.
|
| • |
The passenger seat is removed from the vehicle and reassembled.
|
| • |
Any accessories (side table, seatback table and seat cover, etc)
are replaced or installed.
|
| • |
The passenger seat is interference with the folded rear seat.
|
If Same problems is continued, WCS must be replaced after WCS Reset and
accuracy check.
Components
...
Removal
1.
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
2.
Remove the front passenger seat ass ...
See also:
Towing
If the vehicle needs to be towed, call a professional towing service. Never
tow vehicle with just a rope or chain. It is very dangerous.
Emergency Towing
There are three popula ...
CVVT & Camshaft Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...
DC/DC Converter Component Location
1. DC/DC Converter [200W]
...
Copyright © www.kifomanual.com 2014-2024