Kia Forte: Installation - BCM (Body Control Module) - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / BCM (Body Control Module) / Installation

1.
Install the BCM unit.
2.
Install the center lower cover.
3.
Install the floor console assembly.
4.
Install the heater & A/C control unit.
5.
Connect the negative (-) battery terminal.
Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C control unit. (Refer to Heating,Ventilation, Air Conditi ...

BCM Diagnosis With GDS
1. The body control module can diagnose by using the GDS more quickly. The BCM communicates with the GDS and then reads the input/output value and drives the ac ...

See also:

Air Cleaner Components
1. Air intake hose 2. Air cleaner cover 3. Air cleaner filter 4. Air cleaner body 5. Resonator 6. Air duct 7. Air intake shield ...

Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which tur ...

Audio Remote Control Component Location
1. Remote control switch(LH) 2. Remote control switch(RH) 3. Bluetooth hands free switch 4. Trip switch ...

Copyright © www.kifomanual.com 2014-2024