1. |
Install the key lock cylinder.
|
2. |
Install the key warning switch and key Illumination.
|
3. |
Install the key warning/immobilizer connector.
|
4. |
Connect the ignition switch connector after Install the ignition
switch.
|
5. |
Install the wiper switch.
|
6. |
Install the steering column shrouds.
|
7. |
Install the driver crash pad lower panel.
|
Variable Intake Solenoid (VIS) Valve Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the variable intake solenoid valve connector ( ...
Head Lamp Aiming Instructions
The head lamps should be aimed with the proper beam-setting equipment,
and in accordance with the equipment manufacturer's instructions.
...
Components
...