Clutch cover and disc should be replaced as a set.
|
1. |
Apply grease on a disc spline part and transaxle input shaft spline
part as required.
|
2. |
Install the clutch disc and the cover by using the SST (09411-1P000).
|
3. |
Tighten the clutch cover bolts.
|
4. |
Install the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
|
Remote keyless entry system operations
Lock (1)
All doors are locked if the lock button is pressed. If all doors (and trunk/tailgate)
are closed, the hazard warning lights will blink once to indicate that all doors
(and trunk/tailga ...
Oil Pump Description
The oil pump is built-in as a single unit with the 26 Brake chamber. Rotation
of the pump builds the hydraulic pressure needed for the lubrication of the
various parts of the transaxle and op ...
Rear Door Outside Handle Replacement
(4Door, 5Door)
1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the rear door outside
handle cov ...