Kia Forte: Installation - Manual Transaxle - Manual Transaxle System - Kia Forte TD 2014-2018 Service ManualKia Forte: Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle / Installation

  
If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer, 09453-2F300).

1.
Install in the reverse order of removal.
2.
Adding manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle Fluid")
Removal
1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

Back-up Lamp Switch
...

See also:

ETC (Electronic Throttle Control) System Installation
   • Install the component with the specified torques. • ...

Component Location
1. Horn switch 2. Horn relay (Engine room compartment) 3. Clock spring 4. Horn ...

Transaxle Oil Temperature Sensor Removal
1. Disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - &qu ...

Copyright © www.kifomanual.com 2014-2024