|
1. |
Install the new front impact sensor.
|
2. |
Tighten the front impact sensor mounting nut.
|
3. |
Connect the front impact sensor connector.
|
4. |
Left side - Install the head lamp assembly.
(Refer to Body electrical - "Head Lamps")
Right side - Install the washer reservoir.
(Refer to Body electrical - "Front washer motor")
|
5. |
Reconnect the battery negative cable.
|
6. |
After installing the Front Impact Sensor, confirm proper system
operation:
|
Smart Key Unit Circuit Diagram
...
Disaseembly
1.
Loosen the screw (A-3ea) and then remove the lower cover (B) from
the steering wheel body.
Tightening torque :
7.8 ~ 11.8 N.m(0.8 ...