Be sure to install the harness wires not to be pinched or interfered
with other parts.
|
|
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the new seat back assembly.
|
4. |
Install the front seat assembly.
(Refer to Body - "Front seat assembly")
|
5. |
Recline and slide the front seat forward fully, make sure the
harness wires are not pinched of interfering with other parts.
|
6. |
Reconnect the battery negative cable.
|
7. |
After installing the side airbag (SAB), confirm proper system
operation:
|
Rear Door Window Glass Component Location
(4Door, 5Door)
1. Rear door window glass
...
Sunroof Deflector Replacement
1.
Open the glass fully.
2.
Remove the mounting pins (C), from the frame (B), and then remove
the deflector (A).
...
Cowl Side Trim Replacement
•
Put on gloves to protect your hands.
&n ...