1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the seat belt pretensioner with bolts (B).
|
4. |
Connect the seat belt pretensioner connector (A).
|
5. |
Install the upper anchor bolt.
|
6. |
Install the center pillar trim.
(Refer to Body - "Center pillar trim")
|
7. |
Install the door scuff trim.
(Refer to Body - "Door scuff trim")
|
8. |
Insert the seat belt to the Emergency fastening device.
|
9. |
Reconnect the battery negative cable.
|
10. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Flat tire
For safe operation, carefully read and follow the instructions in this manual
before use.
(1) Compressor
(2) Sealant bottle
The Tire Mobility Kit is a temporary fix to the tire and the tire sh ...
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Installation
1.
Fix the rear view camera with the rear view camera holder.
2.
Connect the rear view camera connector.
3.
Ins ...