Kia Forte: Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Brake System / Master Cylinder / Installation
| 1. |
Install in the reverse order of removal.
|
| 2. |
After installation, bleed the brake system.
(Refer to Brake system bleeding)
|
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the battery (A) and ECM (B).
...
Brake Line
Components
...
See also:
Shift Cable Removal
1.
Remove the floor console assembly.
(Refer to Body - "Floor Consol")
2.
Remove the air duct.
3.
...
Tire Installation
1.
Apply tire soap or lubrication to the top and bottom tire beads.
2.
To fit the bottom bead, position the valve at the 5 o’clock posit ...
Blower Motor Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor voltage does not operate well, substitute
...
Copyright © www.kifomanual.com 2014-2024