Kia Forte: Intake Actuator Replacement
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body -"Glove Box Housing")
|
| 3. |
Disconnect the connector (A) and then remove the intake actuator
(B) after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Intake Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuato ...
Controller
...
See also:
Tail Gate Trim Component Location
(5Door)
1. Tail gate trim
...
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the seat belt after pushin ...
Alternator On-vehicle Inpection
•
Check that the battery cables are connected to the correct
terminals.
...
Copyright © www.kifomanual.com 2014-2024