Kia Forte: Interior
| Interior A |
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
| Interior B |
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
| Interior C |
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
| Interior D |
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Curtain airbag mounting hole (Ø6.6) |
Curtain airbag mounting hole (Ø6.6) |
Cowl crossbar mounting hole (Ø9) |
|
|
|
|
| Front door checker mounting hole (Ø13) |
Cowl side trim mounting hole (Ø8.5) |
Curtain airbag mounting hole (Ø6.6) |
|
|
|
|
| Seat belt height adjuster upper mounting hole (Ø16) |
Seat belt height adjuster lower mounting hole (Ø16) |
Rear door checker mounting hole (Ø13) |
|
|
|
|
| Seat belt retractor mounting hole (Ø12.5) |
Curtain airbag mounting hole (Ø6.6) |
Curtain airbag mounting hole (Ø6.6) |
|
|
|
|
| Curtain airbag mounting hole (Ø8) |
Curtain airbag mounting hole (Ø6.6) |
Wheel house mounting hole (Ø8.5) |
|
|
|
|
| Rear door striker mounting hole (Ø13) |
Wheel house mounting hole (Ø8) |
Parking brake lever mounting hole (Ø9) |
|
|
|
|
| Floor wiring harness mounting hole (12X7) |
Front seat mounting hole (Ø13) |
Floor wiring harness mounting hole (12X7) |
|
|
|
|
| Floor wiring harness mounting hole (12X7) |
Rear floor panel tooling hole (12X7) |
Rear seat mounting hole (Ø16) |
|
|
|
|
| Rear floor panel tooling hole (Ø6.6) |
Rear transverse trim mounting hole (Ø8.5) |
Side Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front side m ...
Rear Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Side outer p ...
See also:
Installation
1.
Install in the reverse order of removal.
2.
Tighten the vacuum pump mounting bolts to the specified torque.
...
Power Door Lock Switch Installation
1.
Install the power window switch.
2.
Connect the connector and install the front door trim.
...
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Copyright © www.kifomanual.com 2014-2024