Kia Forte: Knock Sensor (KS) Description

Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking.

When knocking occurs, the vibration from the cylinder block is applied as pressure to the piezoelectric element. When a knock occurs, the sensor produces voltage signal. The ECM retards the ignition timing when knocking occurs. If the knocking disappears after retarding the ignition timing, the ECM will advance the ignition timing. This sequential control can improve engine power, torque and fuel economy.

Camshaft Position Sensor (CMPS) Installation

   • Install the component with the specified torques. • ...

Knock Sensor (KS) Specification

Item Specification Capacitance (pF) 850 ~ 1,150 ...

See also:

Lift And Support Points
   When heavy rear components such as suspension, fuel tank, spare tire, tailgate and trunk lid are to be removed, place ad ...

Door Scuff Trim Component Location
(4Door, 5Door) 1. Front door scuff trim 2. Rear door scuff trim (2Door) 1. Front door scuff trim ...

Shift Cable Adjustment
1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...