Kia Forte: Knock Sensor (KS) Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Knock Sensor (KS) Removal
| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Disconnect the knock sensor connector (A).
|
| 3. |
Remove the intake manifold (Refer to “Intake And Exhaust System”
in EM group).
|
| 4. |
Remove the installation bolt (A), and then remove the sensor from
the cylinder block.
|
Knock Sensor (KS) Circuit Diagram
(M/T)
(A/T)
...
Knock Sensor (KS) Installation
•
Install the component with the specified torques.
•
...
See also:
35R Clutch Control Solenoid Valve(35R/C_VFS) Description
35R Clutch (35R/C) Control Solenoid Valve is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...
License Lamp Installation
1.
Connect the connector.
2.
Install the license lamp.
...
Start/Stop Button Installation
1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the cluster fascia pan ...
Copyright © www.kifomanual.com 2014-2024