1. |
Disconnect the negative(-) battery terminal.
|
2. |
Remove the lens (A) after loosening the mounting screws.
|
3. |
Remove the license lamp (B) after disconnecting the connector
(A).
|
Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
Engine Coolant Temperature Sensor (ECTS) Installation
•
Install the component with the specified torques.
•
...
Battery Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation:
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf.m, 3.0 ~ 4.4 lb-ft)
...