(5Door) |
|
|
1. |
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
|
2. |
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
|
3. |
After loosening the mounting clips and screw, then remove the
luggage side trim (A).
|
4. |
Disconnect the luggage lamp connector (A).
|
5. |
Install in the reverse order of removal.
|
Transaxle Control Module (TCM) Inspection
Transaxle Control Module(TCM) Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis
ground using the backside of TCM harne ...
Service Standard
Item
Specification
Ignition Timing (°)
BTDC 5 ± 10
Idle Speed (rpm)
A/C OFF
Neutral, N, P-range
640 ± 100
D-range
...
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...