Kia Forte: Mode Control Actuator Description - Heater - Heating,Ventilation, Air Conditioning - Kia Forte TD 2014-2018 Service ManualKia Forte: Mode Control Actuator Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Heating,Ventilation, Air Conditioning / Heater / Mode Control Actuator Description

The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Temperature Control Actuator Replacement
[Driver's side] 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body -& ...

Mode Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...

See also:

Instrument Cluster Installation
1. Connect the cluster connector. 2. Install the cluster assembly. 3. Install the cluster facia panel. ...

Luggage Side Trim Component Location
(5Door) 1. Luggage side trim ...

Drive plate Components
1.  Piston ring 2.  Snap ring 3.  Piston pin 4.  Piston 5.  Connecting rod 6.  Connecting rod upper bearing 7.  Connecting rod lower be ...

Copyright © www.kifomanual.com 2014-2024