1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly")
|
3. |
Disconnec the connectors (A) from the floor console assembly.
|
4. |
Remove the multimedia brackect (A) after loosening the mounting
screws (2EA).
|
5. |
Remove the multimedia jack (A) after pushing the multimedia jack
in the direction of the arrow.
|
Adjustment
Stop lamp switch clearance adjustment
If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~
0.08in), conform to below.
1.
Disconnect the s ...
Components Location
1. Radiator
2. Mounting insulator
3. Valve body cover
4. Oil cooler tube
5. Automatic transaxle
6. Radiator upper mounting bracket
1. Automatic tra ...
Auto Defogging Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defoggin ...